近期需要做相關的一些驗證工作想把相關的一些內容記錄下來以供日后使用后期發現問題也會繼續完善。參考文章https://blog.csdn.net/spiderwower/article/details/138755776但是我按照上述的例子只能做到一半所以又找其他一些相關的資料才完成所有任務。1、下載基模型使用魔搭社區https://modelscope.cn①首先先在魔搭社區找到需要使用的基模型比如我這里使用阿里的Qwen2.5-0.5模型完整名字Qwen/Qwen2.5-0.5B-Instruct②確保已安裝合適的conda環境和python環境這里使用python3.10具體不再細說。conda create-nnlppython3.10conda activate nlp310 切換到nlp310環境 conda activate nlp310 設置鏡像 pip configsetglobal.index-url https://pypi.tuna.tsinghua.edu.cn/simple③安裝torch環境如果有英偉達的顯卡一定要安裝gpu版本我這里筆記本性能有限MX3502G顯存沒辦法只能選擇小模型當然要提前安裝好cuda環境這里計劃使用cuda版本為11.8。可以參考文章win114060配置CUDA11.8pytorch2.0.0好之后可以使用阿里云的鏡像源來安裝pip3installtorch2.6.0 torchvision torchaudio-fhttps://mirrors.aliyun.com/pytorch-wheels/cu118/#南京大學鏡像站pip3installtorch2.6.0 torchvision torchaudio-fhttps://mirrors.nju.edu.cn/pytorch/whl/cu118/可以通過如下地址驗證版本及cuda是否可用python-cimport torch;print(torch.cuda.is_available())當然也可以安裝其他版本。安裝完后再接著安裝訓練微調使用的pip包transformers4.49.0streamlit1.24.0sentencepiece0.1.99accelerate0.29.3datasets2.14.5peft0.10.0tiktoken0.9.0 modelscope[framework]也有可能會報錯原因是transformers的版本問題。這種情況下會建議安裝tf-keras。pipinstalltf-keras④基模型下載使用如下的代碼當然要提前安裝modelscope環境變量中提前設置modelscope的默認存儲地址我把下載路徑換到了d:/cuda/modelscope中。環境變量名MODELSCOPE_CACHE 環境值d:/cuda/modelscope模型下載md_download1.pyfrom modelscopeimportsnapshot_download#模型存放路徑# model_path /root/autodl-tmp#模型名字nameQwen/Qwen2.5-0.5B-Instruct# model_dir snapshot_download(name, cache_dirmodel_path, revisionmaster)model_dirsnapshot_download(name)注意name為你想下載的模型全名運行即可下載python md_download1.py具體內容2、下載訓練集以中文數據集弱智吧為例約1500條對話數據來進行訓練,完整名稱為kigner/ruozhiba-llama3-tt地址為https://huggingface.co/datasets/kigner/ruozhiba-llama3-tt/tree/main我是手工下載文件到路徑d:/cuda/ruozhiba-llma3-tt。3、使用lora微調。①安裝相應的python包。使用其他文章中的訓練代碼只調整了模型名稱,train.pyimportos os.environ[TF_ENABLE_ONEDNN_OPTS]0fromdatasetsimportDatasetimportpandasaspdfromtransformersimport(AutoTokenizer,AutoModelForCausalLM,DataCollatorForSeq2Seq,TrainingArguments,Trainer,)importtorchfrompeftimportLoraConfig,TaskType,get_peft_modelimportwarnings warnings.filterwarnings(ignore,categoryUserWarning)# 忽略告警devicecudaiftorch.cuda.is_available()elsecpuprint(device:device)print(fPyTorch版本:{torch.__version__})print(f是否有可用GPU:{torch.cuda.is_available()})iftorch.cuda.is_available():print(fGPU數量:{torch.cuda.device_count()})print(f當前GPU:{torch.cuda.current_device()})print(fGPU名稱:{torch.cuda.get_device_name(0)})# 模型文件路徑model_pathrD:/cuda/modelscope/models/Qwen/Qwen2___5-0___5B-Instruct# 訓練過程數據保存路徑nameruozhibaoutput_dirf./output/qwen-0.5B-{name}#是否從上次斷點處接著訓練如果需要從上次斷點處繼續訓練值應為Truetrain_with_checkpointFalse# 加載tokenizertokenizerAutoTokenizer.from_pretrained(model_path,use_fastFalse,trust_remote_codeTrue)tokenizer.pad_tokentokenizer.eos_token# 加載數據集dfpd.read_json(fD:/cuda/ruozhiba-llama3-tt/ruozhiba_qa.json)dsDataset.from_pandas(df)print(ds)# 對數據集進行處理需要將數據集的內容按大模型的對話格式進行處理# 大模型處理defprocess_func_mistral(example):MAX_LENGTH384# Llama分詞器會將一個中文字切分為多個token因此需要放開一些最大長度保證數據的完整性instructiontokenizer(fs[INST] SYS\n\n/SYS\n\n{example[instruction]example[input]}[/INST],add_special_tokensFalse)# add_special_tokens 不在開頭加 special_tokensresponsetokenizer(f{example[output]},add_special_tokensFalse)input_idsinstruction[input_ids]response[input_ids][tokenizer.pad_token_id]attention_maskinstruction[attention_mask]response[attention_mask][1]# 因?yàn)閜ad_token_id咱們也是要關注的所以 補充為1labels[-100]*len(instruction[input_ids])response[input_ids][tokenizer.pad_token_id]iflen(input_ids)MAX_LENGTH:# 做一個截?cái)鄆nput_idsinput_ids[:MAX_LENGTH]attention_maskattention_mask[:MAX_LENGTH]labelslabels[:MAX_LENGTH]return{input_ids:input_ids,attention_mask:attention_mask,labels:labels}inputs_idds.map(process_func_mistral,remove_columnsds.column_names)#加載模型# 根據GPU能力選擇合適的數據類型iftorch.cuda.is_available()andtorch.cuda.get_device_capability()[0]8:# A100、H100、RTX 40系列等支持bfloat16torch_dtypetorch.bfloat16else:# 其他GPU使用float16torch_dtypetorch.float16print(f使用的數據類型:{torch_dtype})ifnotos.path.exists(model_path):raiseValueError(f模型路徑不存在:{model_path})# 列出路徑下的文件檢查是否包含配置文件print(f模型路徑下的文件:{os.listdir(model_path)})modelAutoModelForCausalLM.from_pretrained(model_path,device_mapdevice,torch_dtypetorch.bfloat16,use_cacheFalse)model.enable_input_require_grads()# 開啟梯度檢查點時要執行該方法print(model)#設置lora訓練參數configLoraConfig(task_typeTaskType.CAUSAL_LM,target_modules[q_proj,k_proj,v_proj,o_proj,gate_proj,up_proj,down_proj],inference_modeFalse,# 訓練模式r8,# Lora 秩lora_alpha32,# Lora alaph具體作用參見 Lora 原理lora_dropout0.1# Dropout 比例)#設置訓練參數modelget_peft_model(model,config)model.print_trainable_parameters()argsTrainingArguments(output_diroutput_dir,# 模型保存路徑per_device_train_batch_size2,# 訓練的批大小 之前為2顯存2G可用實際顯存最大會占到4.6G 32時顯存占用到15G16時顯存占用到15G8時顯存占用到11.7G4時顯存占用到6.7Ggradient_accumulation_steps2,# 梯度累積步數logging_steps10,# 日志打印的步數num_train_epochs2,# 訓練的輪數 之前為2save_steps25,# 保存的步數save_total_limit2,# 保存的模型數量learning_rate1e-4,# 學習率save_on_each_nodeTrue,# 多節點訓練時每個節點保存一次gradient_checkpointingTrue,# 開啟梯度檢查點label_names[labels],# 標簽名稱)trainerTrainer(modelmodel,argsargs,train_datasetinputs_id,data_collatorDataCollatorForSeq2Seq(tokenizertokenizer,paddingTrue),)#開始訓練# 如果訓練中斷了還可以從上次中斷保存的位置繼續開始訓練iftrain_with_checkpoint:checkpoint[fileforfileinos.listdir(output_dir)ifcheckpointinfile][-1]last_checkpointf{output_dir}/{checkpoint}print(last_checkpoint)trainer.train(resume_from_checkpointlast_checkpoint)else:trainer.train()執行代碼python train.py會生成幾個checkpoint這個過程在我的電腦上2輪批次大小2個使用了差不多50分鐘精度也很差。0.5b訓練截圖后來找了資源又試了其他的批次8,100輪訓練A4000顯卡16G顯存loss降到了0.005情況{loss:0.005,grad_norm:0.1689453125,learning_rate:0.0,epoch:98.94}{train_runtime:4730.9062,train_samples_per_second:31.622,train_steps_per_second:1.966,train_loss:0.09664655848256042,epoch:98.94}100%|█████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████|9300/9300[1:18:5000:00,1.97it/s]我的MX3502G顯存調1.5b模型的截圖②、checkpoint轉為loracheckpoint_to_lora.py具體代碼from transformersimportAutoModelForSequenceClassification,AutoTokenizerimportos# 需要保存的lora路徑lora_pathd:/cuda/lora/qwen-0__5B-lora-ruozhiba# 模型路徑model_pathD:/cuda/modelscope/models/Qwen/Qwen2___5-0___5B-Instruct# 檢查點路徑checkpoint_diroutput/qwen-0.5B-ruozhibacheckpoint[fileforfileinos.listdir(checkpoint_dir)ifcheckpoint-infile][-1]#選擇更新日期最新的檢查點modelAutoModelForSequenceClassification.from_pretrained(foutput/qwen-0.5B-ruozhiba/{checkpoint})# 保存模型model.save_pretrained(lora_path)tokenizerAutoTokenizer.from_pretrained(model_path,use_fastFalse,trust_remote_codeTrue)tokenizer.pad_tokentokenizer.eos_token# 保存tokenizertokenizer.save_pretrained(lora_path)執行代碼python checkpoint_to_lora.py最終會把模型生成到d:/cuda/lora/qwen-0__5B-lora-ruozhiba中③、模型合并merge.py代碼如下from transformersimportAutoModelForCausalLM, AutoTokenizerimporttorch from peftimportPeftModel from peftimportLoraConfig, TaskType, get_peft_model model_pathD:/cuda/modelscope/models/Qwen/Qwen2___5-0___5B-Instructlora_pathd:/cuda/lora/qwen-0__5B-lora-ruozhibadevicecudaiftorch.cuda.is_available()elsecpu# 合并后的模型路徑output_pathrd:/cuda/merge# 等于訓練時的config參數configLoraConfig(task_typeTaskType.CAUSAL_LM,target_modules[q_proj,k_proj,v_proj,o_proj,gate_proj,up_proj,down_proj],inference_modeFalse,# 訓練模式r8,# Lora 秩lora_alpha32,# Lora alaph具體作用參見 Lora 原理lora_dropout0.1# Dropout 比例)baseAutoModelForCausalLM.from_pretrained(model_path,torch_dtypetorch.bfloat16,low_cpu_mem_usageTrue)base_tokenizerAutoTokenizer.from_pretrained(model_path)lora_modelPeftModel.from_pretrained(base, lora_path,torch_dtypetorch.float16,configconfig)modellora_model.merge_and_unload()model.save_pretrained(output_path)base_tokenizer.save_pretrained(output_path)執行代碼python merge.py生成結果如下④模型轉為gguf格式下載源碼https://github.com/ggml-org/llama.cpp使用其中的轉換器轉換其實這里已經轉為gguf格式只是是f16格式的第一種python convert_hf_to_gguf.py D:/cuda/merge--outtypef16--outfiled:/cuda/qwen-ruozhiba.bin也可以用如下指令量化為Q8的模型python convert_hf_to_gguf.py /myweb/cuda/merge--outtypeq8_0 此處處理過后會生成類似 Merge-0.5B-Q8_0.gguf 的文件4、模型量化注意如果僅用f16或者q8則如下可以不用再執行。首先下載llama.cpp的編譯包https://github.com/ggml-org/llama.cpp/releases根據自己的cpu情況選擇合適的包比我的使用的cpu是intel10代處理通過cpuz可以查看支持的技術我這里支持AVX和AVX2可以使用AVX2的包下載后解壓會得到相關的編譯包可以將路徑加到path中但要注意避免沖突PS:后期升級ollama后出現了沖突去掉path即可。然后在D:/cuda中執行轉換llama-quantize qwen-ruozhiba.bin q5_k_m會生成一個新文件ggml-model-Q5_K_M.gguf將文件放到新的目錄D:/cuda/qwen2.5-new5、安裝ollama。下載https://ollama.com/download/OllamaSetup.exe安裝。然后到文件夾中新增一個文件文件名ModelFile內容如下第一種FROM D:/cuda/qwen2.5-new/ggml-model-Q5_K_M.gguf#FROM ./Merge-1.5B-F16.gguf#FROM D:/cuda/qwen2.5-new/ggml-model-Q5_K_M.gguf#FROM D:/cuda/qwen2.5-new/ggml-model-0.5_Q5_K_M.gguf# set the temperature to 0.7 [higher is more creative, lower is more coherent]PARAMETER temperature0.7PARAMETER top_p0.8PARAMETER repeat_penalty1.05TEMPLATE{{if.System}}|im_start|system{{.System}}|im_end|{{end}}{{if.Prompt}}|im_start|user{{.Prompt}}|im_end|{{end}}|im_start|assistant{{.Response}}|im_end|# set the system messageSYSTEM You are a helpful assistant.第二種FROM ./Merge-1.5B-F16.gguf# 修復1簡化系統提示移除冗余條件判斷SYSTEM|im_start|system You are Qwen, created by Alibaba Cloud. You are a helpful assistant.|im_end|# 修復2完全重寫模板結構TEMPLATE{{if.System}}|im_start|system{{.System}}|im_end|{{else}}|im_start|system You are Qwen, created by Alibaba Cloud. You are a helpful assistant.|im_end|{{end}}{{range .Messages}}{{ifeq .Roleuser}}|im_start|user{{.Content}}|im_end|{{elseifeq .Roleassistant}}|im_start|assistant{{.Content}}|im_end|{{elseifeq .Rolesystem}}|im_start|system{{.Content}}|im_end|{{end}}{{end}}|im_start|assistant第三種如果需要支持tool可以使用如下內容#FROM qwen2.5:1.5bFROM ./Merge-1.5B-F16.gguf# set the temperature to 0.7 [higher is more creative, lower is more coherent]PARAMETER temperature0.7PARAMETER top_p0.8PARAMETER repeat_penalty1.05TEMPLATE{{-if.Messages}}{{-ifor .System .Tools}}|im_start|system{{-if.System}}{{.System}}{{- end}}{{-if.Tools}}# ToolsYou may call one ormorefunctions to assist with the user query. You are provided withfunctionsignatures withintools/toolsXML tags:tools{{- range .Tools}}{type:function,function:{{.Function}}}{{- end}}/toolsFor eachfunctioncall,returna json object withfunctionname and arguments withintool_call/tool_callXML tags:tool_call{name:function-name,arguments:args-json-object}/tool_call{{- end}}|im_end|{{end}}{{- range$i,$_:.Messages}}{{-$last:eq(len(slice $.Messages$i))1-}}{{-ifeq .Roleuser}}|im_start|user{{.Content}}|im_end|{{elseifeq .Roleassistant}}|im_start|assistant{{if.Content}}{{.Content}}{{-elseif.ToolCalls}}tool_call{{range .ToolCalls}}{name:{{ .Function.Name }},arguments:{{.Function.Arguments}}}{{end}}/tool_call{{- end}}{{ifnot$last}}|im_end|{{end}}{{-elseifeq .Roletool}}|im_start|usertool_response{{.Content}}/tool_response|im_end|{{end}}{{-ifand(ne .Roleassistant)$last}}|im_start|assistant{{end}}{{- end}}{{-else}}{{-if.System}}|im_start|system{{.System}}|im_end|{{end}}{{if.Prompt}}|im_start|user{{.Prompt}}|im_end|{{end}}|im_start|assistant{{end}}{{.Response}}{{if.Response}}|im_end|{{end}} SYSTEMYou are a helpful assistant, created by Alibaba Cloud and fine-tunedforspecific tasks. You have access to the following tools: - When appropriate, you can use tools to assist with the users query. - Tools will be provided in tools/tools XML tags. - For each function call, return a json object with function name and arguments within tool_call/tool_call XML tags. You should only use tools when necessary and beneficial to the users query.執行創建ollama create qwen2_0.5b_demo--file./ModelFile最后運行模型ollama run qwen2_0.5b_demo可以愉快的玩耍啦?？梢允褂胦llama show qwen2_0.5b_demo類似的指令來查看部署的模型類型。一般模型我今天又調了1.5b做測試內容如下已經支持tools了但是因?yàn)榇竽Ｐ蛯?shí)在太小沒什么效果后來訓練的新模型還有些用有空也可以嘗試比較大的模型作為基模型來進行訓練。如果需要聯網思路可以參考文章https://blog.csdn.net/ChinaLiaoTian/article/details/145504774如果需要知識庫能力可以參考https://blog.csdn.net/sheex2012/article/details/138339166